65
Publishing Discs
Creating Labels
Create a label design in Label view (See “Label view” on page 37.) of EPSON Total Disc Maker.
In the label view, an image of the print results of the label appears. You can edit the label while checking the image of
the print results.
• There is no need to create a label if you only want to write data to discs.
• For details on EPSON Total Disc Maker, see EPSON Total Disc Maker Help.
• When printing barcodes and 2D codes, be sure to use Epson brand ink cartridges.
• When printing barcodes and 2D codes on discs that are not EPSON specified CD/DVDs,
check whether the printed barcodes or 2D codes can be read correctly by a scanner.
• Do not place barcodes and 2D codes where they overlap with other print data, or
where they extend out of the print area.
• Barcodes and 2D codes use the ratio of black to white to indicate information. If ink
penetration results in a deterioration in the ratio of black to white, barcodes and 2D
codes may not be able to be read correctly. Check whether the printed barcodes and
2D codes can be read correctly by a scanner.
• If a barcode printed with bidirectional printing cannot be read correctly, align the print
head (See “Aligning the Print Head” on page 90.) and then print the barcode, or print
the barcode with unidirectional printing.
To Next Page
Loading...
Need help?
General
