Epson PP-1002 User Manual

27
Software Settings
System Requirements
The minimum hardware and system requirements for using the supplied software are shown below.
OS (Operating system)
• Mac OS X v10.10 Yosemite
• Mac OS X v10.9 Mavericks
• Mac OS X v10.8 Mountain Lion
• Mac OS X v10.7 Lion
• Mac OS X v10.6 Snow Leopard
CPU
Mac OS X v10.10
Mac OS X v10.9
Mac OS X v10.8
Mac OS X v10.7
Intel 64 bit CPU
Mac OS X v10.6 Intel Core Duo 1.83 GHz or faster processor
Memory
Mac OS X v10.10
Mac OS X v10.9
Mac OS X v10.8
Mac OS X v10.7
2 GB or more
Mac OS X v10.6 1 GB or more
HDD available space
25 GB or more
HDD rotation speed
7200 rpm or faster
Display
XGA (1024 x 768 pixels) or higher
65,536 colors or more
Interface
Mac OS X v10.10
Mac OS X v10.9
• For the PP-100II: USB 3.0 or USB 2.0
∗ Compatible with USB 3.0 or USB 2.0 standard
∗ Ensure Super Speed USB or Hi-Speed USB performance
• For the PP-100/PP-100AP/PP-50: USB 2.0
∗ Compatible with USB 2.0 standard
∗ Ensure Hi-Speed USB performance
Mac OS X v10.8
Mac OS X v10.7
Mac OS X v10.6
USB 2.0
• Compatible with USB 2.0 standard
• Ensure Hi-Speed USB performance
• The product may not function properly where third-party writing software is installed,
anti-virus software is installed, or another USB device is connected.
• The source drive should use commands and operations that are compliant with MMC4
or higher, and be capable of reading sub-channels. (Only for PP-100II/PP-100/PP-50)
• If you use a USB 3.0 Mac computer with Mac OS X v10.8 for the PP-100II, be sure to use
a USB 2.0 cable.

Epson PP-1002 Specifications

General

Brand	Epson
Model	PP-1002
Category	Disc Duplicator
Language	English