62
For PP-50
4
Insert the stacker, and close the disc cover.
Publish Mode Input Stacker Number of Discs
Standard Mode Stacker 1 Up to approximately 50 discs
Low-volume Mode
(Different types of discs can be loaded into Stacker 1
and Stacker 2.)
Stacker 1 Up to approximately 50 discs
Stacker 2 Up to approximately 50 discs
For PP-100II/PP-100/PP-100AP
• When Stacker 4 is set as the output stacker in Standard mode and External Output
mode, remove Stacker 3 and set the lock lever to UNLOCK.
• In Batch Mode and when Stacker 3 is set as the output stacker in External Output
Mode, make sure that no discs are loaded in Stacker 3 and Stacker 4. Also, set the lock
lever to LOCK, and do not pull out Stacker 4.
To Next Page
Loading...
