83
Maintenance
3
Take the ink cartridge out of its package.
4
Use the label color to check where to set the ink cartridge, and gently push the new ink
cartridge into the ink cartridge holder on this product until you hear a click.
• For optimum printing quality, open the clear plastic package only immediately before
installing. After opening the cartridge, try to use it up within six months. If you use an ink
cartridge that has been left open for a long time, the print quality may decline.
• When you open the plastic package, be careful not to drop the ink cartridge. The ink
may leak out.
• Do not leave the ink supply port on an ink cartridge facing downward. This could stain
the desk or other surface. In addition, dirt stuck on this product may prevent it from
functioning properly.
• Do not shake the ink cartridge too hard. The ink cartridge may leak if you shake it too
much.
• Do not touch the green IC chip attached to the ink cartridge. Also, never peel off the
labels and film attached to the ink cartridge. This could prevent you from properly
setting, operating, or printing with the ink cartridge, or ink could leak out.
• Use up the ink cartridge before the expiration date printed on the box.
Do not repeatedly take out and put in an ink cartridge which has been set. Ink could stain
the ink cartridge or the product.
To Next Page
Loading...
Need help?
General
