102
Setting Options Description
Image Enhancement Image Preset Mode Selects preset Image Enhancement
settings
Noise Reduction Reduces flickering in analog images
(only available when Image
Processing is set to Fine in the
Signal I/O menu and 4K 100/120Hz
signals are not being projected)
MPEG Noise Reduction Reduces the noise or static in
MPEG video (only available when
Image Processing is set to Fine in
the Signal I/O menu and 4K
100/120Hz signals are not being
projected)
Super-resolution Sharpens blurred images when
projecting low-resolution images
Fine Line Adjust: enhances the
contrast and outlines of complicated
images
Soft Focus Detail: enhances the
contrast and outlines of smooth
backgrounds
Auto Contrast
Enhancement
Automatically adjusts the contrast of
the projected image to create a
clearer and sharper image
Reset Resets all settings in the Image
Enhancement menu
Dynamic Tone Mapping Off
On
Automatically adjusts to the
optimum HDR level according to the
scene (only available when Dynamic
Range is set to Auto and Signal
Status is set to either HDR10 or
HDR10+, or when Dynamic Range
is set to HDR10/HDR10+)
To Next Page
Loading...