103
Setting Options Description
Scene Adaptive Gamma Varying levels available Adjusts the coloring and obtains a
more vivid image depending on the
scene. Select a larger number to
enhance contrast.
Gamma –2 to 2
Custom
Adjusts the colors by selecting one
of the gamma correction values or
referring to a gamma graph
RGBCMY Varying levels available Adjusts the hue, saturation, and
brightness for each color
Reset to Defaults — Resets all settings for the Color
Mode currently selected
Note: The Brightness setting does not affect laser brightness. To change the laser brightness mode,
use the Light Output setting.
Input Source Settings
To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description
Source — Displays the current input source
selected
Aspect See the list of available aspect
ratios
Sets the aspect ratio (width-to-
height ratio)
Reset to Defaults — Resets all settings for the currently
selected input source
Note: Select Reset Image Settings to reset all settings on the Image menu to their default values.
Parent topic: Adjusting the Menu Settings
Related references
Input Signal Settings - Signal I/O Menu
Available Image Aspect Ratios
Available Color Modes
To Next Page
Loading...
