Epson SC-S30600 Series - Board Replacement Date & Time Setting

SC-S30600 Series Revision B
ADJUSTMENT Boards Related Checks and Adjustments 267
Confidential
4.14.4 Board Replacement Date & Time Setting
EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and select Main Board Exchange Counter (or Power
Supply Unit Replacement Date & Time setting).
3. Click [Run]. When a confirmation message is displayed, click [OK].
4. Click [Finish].
5. Turn the printer OFF to finish the adjustment.
Figure 4-61. [Power Supply Unit Replacement Date & Time setting] Screen