Epson SC-S30600 Series User Manual

SC-S30600 Series Revision B
ADJUSTMENT Other Printer Checks and Adjustments 270
Confidential
4.15.3 Heater Function Check
EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and select Heater Function Check.
3. Select the heater(s) to be checked, and click [Run].
The selected heater(s) starts to heat up and reaches a predetermined temperature
after about 5 minutes.
4. Touch the heater(s) and check that it is warm.
If the heater(s) temperature does not reach the predetermined level within 10
minutes, an error is displayed.
5. Click [Finish].
6. Turn the printer OFF to finish the adjustment.
Figure 4-64. [Heater Function Check] Screen
C A U T I O N
In a cool environment, it may take a longer time to heat up the
heaters. (If the ambient temperature is 10 degrees C, it may take 20
minutes or longer.)

Epson SC-S30600 Series Specifications

General

Brand	Epson
Model	SC-S30600 Series
Category	Printer
Language	English