To Next Page

To Previous Page

Use the l/r buttons to select iOS, and then

press the Z button.

Check the message, and then press the Z

button to proceed.

The QR code is displayed on the printer’s

screen.

Open the standard camera app on iPhone, iPad,

iPod touch, and then use the photo mode to

scan the QR code on the printer’s screen.

Use the Camera app for iOS 11 or later. You

cannot connect to the printer using the

standard camera app for iOS 10 or earlier. Also,

you cannot connect to the printer using an app

for scanning codes. If you cannot connect, press

the l button. See "Related Information" below

for details on connecting.

Tap the notification for “DIRECT- XXXXX

Series” network connection displayed in the

iPhone, iPad, or iPod touch screen.

The model number is shown in XXXXX.

Check the message, and then tap Join.

Press the Z button on the printer.

Open the printing app you are using, and then

select the printer.

See the information displayed on the printer’s

screen to select the printer.

Press the Z button on the printer.

For smart devices that have been connected to the

printer before, select the network name (SSID) on the

smart device’s Wi-Fi screen to connect them again.

Related information

U “Connecting to Devices Other Than iOS Using

Wi-Fi Direct” on page 109

U “Printing from Smart Devices” on page 47

SL-D500 Series User's Guide

Wireless LAN Connection

108

Epson SL-D500 Series User Manual

Questions and Answers: