Epson SL-D500 Series User Manual

c
Important:
The ink inside the ink bottle will freeze if left at below -14 °C for a long time. If it does freeze, leave it at room
temperature (25 °C) for at least two hours until it has defrosted (without condensation).
General Specifications
Temperature Operating: 10 to 35 °C
Storage (before unpacking): -20 to 60 °C (within 120 hours at 60 °C, one month at 40 °C)
Storage (after unpacking): -20 to 40 °C (within one month at 40 °C)
Humidity Operating: 20 to 80% (without condensation)
Storage (before unpacking): 5 to 85% (without condensation)
Storage (after unpacking): 5 to 85% (without condensation)
Weight Main unit: 7.0 kg (ink not included)
Dimensions Main unit: 299 (W) x 350 (D) x 154 (H) mm
U “Necessary Space” on page 146
Installed software version E1.1930.0002
Necessary Space
*Space needed to do maintenance
OPEN SOURCE SOFTWARE LICENSE TERMS
This product uses open source software as well as software for which Epson owns the rights.
The entire texts of the license agreements of the open source software are shown below.
Windows
64 bit: %ProgramFiles(x86)%\EPSON\SL-D500 Series\License\License.txt
SL-D500 Series User's Guide
Appendix
146

Epson SL-D500 Series Specifications

General

Brand	Epson
Model	SL-D500 Series
Category	Printer
Language	English