Epson Stylus Photo 925 - Page 117

EPSON Stylus Photo 925 Revision A
Disassembly and Assembly Disassembly 117
7. Align the projections of the spur gear 73.6 with the round holes in the PF Scale,
and put the PF Scale on the PF Scale Shaft with care not to slant the PF Scale. At
this point, do not stick the PF Scale on the spur gear 73.6 yet.
8. Using the PF scale unit mounting tool (AS-Tool No.1051767), stick the PF Scale
on the spur gear.
Figure 4-94. Sticking the Loop Scale
PF Scale
Spur gear
73.6
Projections
PF scale unit mounting tool 1051767
C H E C K
P O I N T
T Make sure that the two projections of the spur gear 73.6 are
positioned in the round holes in the PF Scale.
T Make certain that the PF Scale is free from soil or flaws.
Round hole
Projection