Epson Stylus Photo 925 - Page 62

EPSON Stylus Photo 925 Revision A
Troubleshooting Unit Level Troubleshooting 62
Table 3-6 Check Points for “Paper Out” Error
Observation LCD Indication
Unit/part in
Question
Check Points Remedy
Although the LD Roller rotates
and tries to feed paper from the
ASF, the Hopper does not
operate.
Paper is not set
correctly. Set the
paper correctly; then
press the Roll Paper
button if using roll
paper, or press the
Maintenance button if
using sheet paper.
ASF Unit 1. During paper feed operation, check to see if the Hopper
is operating and the compression spring 4.96 is in the
correct position.
1. Install the compression spring 4.96 properly
between the ASF frame and the Hopper.
Compression spring 4.96