EPSON Stylus Photo 925 Revision A
Disassembly and Assembly Disassembly 96
8. Align the cut portions found at the rear of the ASF Unit, and separate the ASF
Frame and ASF Hopper.
Figure 4-46. Separating the ASF Frame and ASF Hopper
9. Remove the Torsion Spring 32.7 set at the rear of the ASF Frame.
Figure 4-47. Removing the Torsion Spring 32.7
10. Remove the Pad holder (Paper return plate) from the ASF frame
Figure 4-48. Removing the Pad Holder
ASF Frame
ASF Hopper
Torsion Spring 32.7
Pad Holder
To Next Page
Loading...
