EasyManua.ls Logo

Epson Stylus Pro 4000 - Page 294

Epson Stylus Pro 4000
396 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
294 Troubleshooting
SET INK CRTG CSIC error has occurred. Remove the ink
cartridge and reinstall
it. If this message is
displayed after
reinstalling the ink
cartridge, replace it.
See “Replacing Ink
Cartridges” on page
264.
NO INK CRTG Ink cartridge is not
installed, or ink lever is
raised to the released
position.
Install ink cartridge, or
lower the ink lever to
the secured position.
MNT TNK FULL The maintenance tank is
full.
Replace the
maintenance tank with
new one. See
“Replacing the
Maintenance Tank” on
page 277.
LOWER INK LEVERS Both ink levers have
been raised.
Lower the ink levers.
LOWER L INK LVR The ink lever on the left
ink compartment has
been raised.
Lower the ink lever on
the left ink
compartment.
LOWER R INK LVR The ink lever on the right
ink compartment has
been raised.
Lower the ink lever on
the right ink
compartment.
TOP COVER OPEN Top cover is open. Close the top cover.
LOAD PAPER The paper lever is in the
released position.
Move the paper lever
to the secured position.
SET PAPER LEVER Paper lever is in the
released position.
Move the paper lever
to the secured position.

Table of Contents

Other manuals for Epson Stylus Pro 4000

Related product manuals