Troubleshooting 293
7
7
7
7
7
7
7
7
7
7
7
7
LOAD SHEET PAPER
IN P. TRAY
The cut sheet media is
not set correctly in the
paper tray.
Set the cut sheet media
in the paper tray
correctly, and select
Sheet . See “Loading
cut sheet media” on
page 248.
FEED SHEET PAPER The cut sheet media
needs to be loaded
manually.
Load the cut sheet
media.
FORBIDDEN MEDIA
FROM P. TRAY
Cut sheet media, which
is to be loaded from the
front or rear manual feed
slot, is being loaded from
the paper tray.
Remove the cut sheet
media from the paper
tray, and load it from
the proper paper feed
slot. See “Confirming
the paper path” on
page 247.
FEED SHEET PAPER
MANUALLY
The cut sheet media
needs to be loaded
manually.
Load the cut sheet
media manually from
the front or rear manual
feed slot. See
“Confirming the paper
path” on page 247.
INK OUT Ink cartridge is empty. Replace the empty ink
cartridge with new one.
See “Replacing Ink
Cartridges” on page
264.
INVALID INK CRTG Ink cartridge with the
wrong product code is
installed.
Install the ink cartridge
with the correct
product code. See
“Consumable
Products” on page 338.
WRONG INK CRTG The installed ink
cartridge cannot be
used with this printer.
Remove the ink
cartridge, and install
the ink cartridge that
can be used with this
printer. See
“Consumable
Products” on page 338.
To Next Page
Loading...
