EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 108
TEST
Elec. Electric Error Serious errors are displayed
Error0 Error 0 --- ---
Error1 Error 1 --- ---
Error2 Error 2 --- ---
Error3 Error 3 --- ---
Error4 Error 4 --- ---
Error5 Error 5 --- ---
Error6 Error 6 --- ---
Cut Adj. Adjusts the cut pressure --- --- --- --- --- ---
Actuator 2 Actuator 2
Cutter Sol. Cutter solenoid --- --- --- ---
Pump Motor Pump motor --- --- --- ---
Regulator Sol. Regulator solenoid --- --- --- ---
Ink Press Motor Pressure Motor --- --- --- ---
Edge Sns Lvl Measure the Edge sensor --- --- --- --- --- ---
Auto Gap Adj. Auto gap adjustment
Auto Uni D Auto Uni-D --- --- --- ---
Auto Bi-D PG
1.6
Auto Bi-D PG1.6 --- --- --- ---
Auto Bi-D PG
0.8
Auto Bi-D PG0.8 --- --- --- ---
Adjustment
Fan Suction fan function check --- --- --- --- --- ---
Paper
Adjusts the Paper Thickness
sensor
--- --- --- --- --- ---
RearAD Rear AD adjustment --- --- --- --- --- ---
Check Nozzle Check the head nozzles Output Pattern Prints a pattern --- --- --- ---
Cutter Check the cut position --- --- --- --- --- ---
IM Sensor
Adjust the sensitivity of the
Ink-mark sensor
--- --- --- --- --- ---
Platen Pos. Platen position adjustment --- --- --- --- --- ---
Platen Pos. Chk. Platen position check --- --- --- --- --- ---
Rear Sens. Pos.
Corrects the Rear sensor
position
--- --- --- --- --- ---
CR Head Slant CR Head Alignment --- --- --- --- --- ---
Continued to next page
Table 1-53. Self Testing Menu Items(continued)
1st Screen 2nd Screen 3rd Screen 4th Screen 5th Screen
Panel
Display
Panel Display Description Panel Display Description
Panel
Display
Description
Panel
Display
Description
To Next Page
Loading...
