Epson STYLUS PRO 9400 - Reset When Cutter Solenoid Change; Reset When Printhead Change

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Reset Counters 369
5.6.5 Reset When PrintHead Change
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Reset When Printhead Change].
3. Click the [Run] button to reset the Head Unit change counter.
4. Click the [Finish] button.
Figure 5-108. [Reset When Printhead Change] Screen
5.6.6 Reset When Cutter Solenoid Change
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Reset When Cutter Solenoid
Change].
3. Click the [Run] button to reset the Cutter Solenoid Unit change counter.
4. Click the [Finish] button.
Figure 5-109. [Reset When Cutter Solenoid Change] Screen