EasyManua.ls Logo

Epson STYLUS PRO 9400 - Function to Prevent Irregular Printing; MIB Function

Epson STYLUS PRO 9400
428 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 136
1.4.7 MIB Function
The Stylus Pro 7400/7800 and the Stylus Pro 9400/9800 are compatible with the two
types of MIB described in the tables below. This allows you to see the printer
information (spec, status, consumables) obtained from the MIB on a computer via a
network. The Local MIB is used when the printer is in Type-B Level 3 Packet Mode.
Compatible MIB
Global MIB
Local MIB
1.4.8 Function to Prevent Irregular Printing
Forced cancel of print job
When the printer receives 16KB DC1 at the beginning of each job, it performs a
special initialization operation.
Refer to “1.4.9 Initialization” (p.137) for more details.
Skip reading of irregular data
Unprintable characters
Characters including ASCII code in text print mode.
Note : 0Ah, 0Ch, 0Dh, 11h, and 1Bh are ESCP command supported by the printer. The printer
judges the command at the same time and decides whether to print it.
Job time out
Refer to “1.4.4.11 Time Out” (p.68).
Preventing the remaining data from being printed on the second cut sheet
If the print data size is larger than the maximum data size that can be printed
on a single sheet (manual feed), the remaining data that cannot be printed on
the first sheet is not printed on the second sheet.
The remaining print data (graphic data) is ignored, and the next new print data
is printed from the top of the second paper.
Name Contents
Host Resource MIB Device information etc.
Printer MIB Printer information (function/commodity/status)
EPSON Printer Private MIB Printer information (DeviceID/StatusReply letter
strings etc.)
Name Contents
Type-B Local MIB Type-B I/F setting /information
EMAP Local MIB Corresponding MIB information
Table 1-65. Unprintable Hexadecimal Code (Control Character Code)
Code Character Code Character Code Character Code Character
00h NULL 08h BS 10h DLE 1Ah SUB
01h SOH 09h HT 11h DC1 1Bh ESC
02h STX 0Ah NL (LF) 12h DC2 1Ch FS
03h ETX 0Bh VT 13h DC3 1Dh GS
04h EOT 0Ch NP (FF) 16h SYN 1Eh RS
05h ENQ 0Dh CR 17h ETB 1Fh US
06h ACK 0Eh SO 18h CAN 7Fh DEL
07h BEL 0Fh SI 19h EM --- ---

Table of Contents

Other manuals for Epson STYLUS PRO 9400

Related product manuals