EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Optional Units and Consumables 144
1.7 Optional Units and Consumables
1.7.1 Ink Cartridge
Selection of ink types, detection of cartridges and the amount of remaining ink are
controlled by CSIC.
SPECIFICATION
Type: Pigment
Form: Special ink cartridge
Ink capacity:
110 ml
220 ml
Dimension:
110 ml / 220 ml
(W): 27.1 mm x (D): 185 mm x (H): 107 mm
Total mass:
110 ml: Approx. 250 g
220 ml: Approx. 370 g
Available ink quantity:
110 ml: Over 103 ml
220 ml: Over 210 ml
Color:
Stylus Pro 7800, Stylus Pro 9800
Photo black, magenta, light magenta, cyan, light cyan, yellow, light black,
matte black, light light black
Stylus Pro 7400, Stylus Pro 9400
Matte black, magenta, cyan, yellow
Environmental requirements
Temperature: 10ºC ~ 40ºC
Relative temperature: 5% ~ 85% (without freezing)
Storage temperature
Life: 2 years (Total time of before and after of installing
printer.)
Insured date of printing quality:
Pigment 6 month (After printer is installed.)
Installation position:
See “1.1.1 Features” (p.11) for the information on the installation position of each
ink cartridge.
C H E C K
P O I N T
When installing the pigment ink cartridges, shake them
horizontally after unpacking them for about five seconds
beforehand to ensure the designed print quality.
C H E C K
P O I N T
Ink in the cartridge will freeze if it is left under minus 10
degrees C temperature. (Reference: Takes about three hours
to thaw ink frozen in minus 20 degrees C completely under 25
degrees C.)
Condition Temperature Remarks
During packed storage –30ºC to 40ºC Within 1 month for 40ºC
Loading printer –20ºC to 40ºC Within 1 month for 40ºC
During transportation –30ºC to 60ºC • Within 1 month for 40ºC
• Within 120 hours for 60ºC
C A U T I O N
If you remove an ink cartridge before it reaches the ink out state,
you should store it under the same ambient conditions as for the
printer body in such a way that the ink discharge opening is
protected from dust intrusion. The ink cartridge stored as such and
installed again can be used if it is within the term of availability.