Epson STYLUS PRO 9400 - 1.4 Control Panel

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 36
1.4 Control Panel
1.4.1 Buttons and Functions
Figure 1-6. Panel Design
Figure 1-7. LCD Panel
1.4.1.1 LED
The following table describes the LED displays and status.
Note "*1": Alternately turns On and Off every 500 ms. In the case of maintenance call error,
they light for 100 ms at intervals of five seconds.
"*2": When a printer error occurs, printing operation is disabled and the Pause LED turns
ON.
Note : When a service call error occurs, the all LEDs flash.
Paper Feed Enter Power
LED
Pause
LED
Paper check
LED
Ink check LED
Power Pause Menu
Paper Feed Paper Source LCD
Message
Roll Paper Counter
Custom Paper No.
Paper Source
Platen Gap setting Ink Counter
Maintenance Tank Counter
(One bar is displayed on Stylus Pro
7400/7800)
Roll Paper Margin
Table 1-26. LED
LED Color Displays Status
Power Green ON The power is ON.
Flashing*
1
Receiving data or executing power off sequence
OFF The power is OFF.
Pause Yellow ON*
2
Temporarily stopping the operation (The yellow light also
turns on when an error occurs).
Flashing*
1
---
OFF Ready for printing.
Paper
Check
Red ON Impossible to make a print due to the paper status
Flashing*
1
• A paper feeding or ejecting error is occurring
• The Paper Near-End warning is occurring
• A maintenance call error is occurring.
OFF The papers are in normal condition without an error or
warning.
Ink
Check
Red ON An ink-related error is occurring
Flashing*
1
An ink-related warning is occurring
OFF The inks are in normal condition without an error or
warning.