Epson STYLUS PRO 9400 - Reset When Cleaning Unit Change; Reset When CR Unit Change

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Reset Counters 368
5.6.3 Reset When CR Unit Change
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Reset When CR Unit Change].
3. Click the [Run] button to reset the CR Motor life counter.
4. Click the [Finish] button.
Figure 5-106. [Reset When CR Unit Change] Screen
5.6.4 Reset When Cleaning Unit Change
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Reset When Cleaning Unit
Change].
3. Click the [Run] button to reset the Cleaning Unit change counter.
4. Click the [Finish] button.
Figure 5-107. [Reset When Cleaning Unit Change] Screen