Epson STYLUS PRO 9400 - Print Adjustment Check Pattern

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Check Results 364
5.5.3 Print Adjustment Check Pattern
All the adjustment patterns and adjusted parameters stored on the printer can be printed
out using this menu.
 Paper Used
 Size: 24” (Stylus Pro 7400/7800)
44” (Stylus Pro 9400/9800)
 Type: Doubleweight Matte Paper
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Print Adjustment Check Pattern].
3. Select the [Print All Pattern] or [Print Variables] and click the [Print] button to
start the print operation.
z Print All Pattern
All adjustment patterns and parameters are printed out at a time.
z Print Variables
All adjusted parameters stored on the printer are printed out at a time.
4. After confirming that all patterns are printed, click the [Finish] button.
Figure 5-101. [Print Adjustment Check Pattern] Screen
C A U T I O N
Required length of roll paper for performing the “Print All
Pattern” is approx. 3.6 meters. Be sure to check the remaining
length or roll paper and keep the paper eject area clear of any
obstacles before performing the printing operation.