Epson STYLUS PRO 9400 - Page 115

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 115

Nozzle Rows and Ink Colors
Cut Position Check
Performs a cut operation with default setting to be checked if the cut position is
accurate or not.
Ink-mark Sensor Sensitivity Check
An amount of light emitted from the Ink-mark sensor for the loaded paper can be
adjusted. The result is displayed as shown in the table below.
Platen Position Adjustment
The position of each ink pad on the platen can be detected and adjusted.
Figure 1-27. Platen Position Adjustment Pattern
Enter the shift length obtained by the pattern with “-” (minus) mark if the pad is shifted
toward the home side, or put “+” (plus) mark if it is shifted toward the anti-home side.
Table 1-56. Nozzle Rows and Ink Colors
Nozzle
Row
Ink Color
Stylus Pro 7800, Stylus Pro 9800 Stylus Pro 7400, Stylus Pro 9400
A Light Light Black Matte Black
B Light Magenta
C Light Cyan Magenta
D Light Black
E Photo Black, Matte Black Cyan
F Cyan
G Magenta Yellow
H Yellow
PW1: GAIN I/O D/A correction value A/D correction value A/Dcorrection value(2)
PW2: GAIN I/O D/A correction value A/D correction value ---
Print mode: 360dpi, Uni-D, 320cps, VSD1, Large
Home side
Anti-home side
Pattern
Ink Pad
Ribs on Platen
Home to Anti-home side
Anti-home to Home side