Epson STYLUS PRO 9400 - Page 119

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 119

Gap adjustment (Bi-D)
A Bi-D (PG 1.6mm/PG 0.8mm) pattern is printed. Enter a number of the most
neatly printed lines.
Figure 1-35. Gap Adjustment (Bi-D) Pattern
Figure 1-36. Closeup of the Bi-D Pattern
Bi-D: PG1.6 VSD1
Pattern Pattern Pattern
Lk: AVE___ Lc: AVE___ Lm: AVE___ LLk: AVE___
PK: AVE___ C: AVE___ M: AVE___ Y: AVE___
Note : Number of Bi-D pattern blocks aligned within the paper width differ between the
wide and narrow models:
The Stylus Pro 9400/9800: three pattern blocks for each waveform
The Stylus Pro 7400/7800: two pattern blocks for each waveform
Pattern Title
Information
20 22 24 26 28 30 32 34 36 20 22 24 26 28 30 32 34 36 20 22 24 26 28 30 32 34 36 20 22 24 26 28 30 32 34 3
6
20 22 24 26 28 30 32 34 36 20 22 24 26 28 30 32 34 36 20 22 24 26 28 30 32 34 36 20 22 24 26 28 30 32 34 3
6
 Print mode:
 VSD1: 360dpi, Bi-D, 320cps, VSD1, Large
 VSD2: 360dpi, Bi-D, 240cps, VSD2, Large
 VSD3: 360dpi, Bi-D, 240cps, VSD3, Large
Table 1-60. Pattern Title
PG Waveform Pattern Title
1.6 mm VSD1d Bi-D: PG1.6 VSD1
VSD2d Bi-D: PG1.6 VSD2
VSD3 Bi-D: PG1.6 VSD3
0.8 mm VSD1 Bi-D: PG0.8 VSD1
VSD2 Bi-D: PG0.8 VSD2
VSD3 Bi-D: PG0.8 VSD3
Table 1-61. Information
Printing
Position
Model Information Printed with the Patterns
Above the
pattern
Stylus Pro 7800,
Stylus Pro 9800
PK: AVE____ C: AVE____ M: AVE____ Y: AVE____
Stylus Pro 7400,
Stylus Pro 9400
C: AVE____ C-2: AVE____ Y: AVE____ Y-2: AVE____
Below the
pattern
Stylus Pro 7800,
Stylus Pro 9800
Lk: AVE____ Lc: AVE____ Lm: AVE____ LLk: AVE____
Stylus Pro 7400,
Stylus Pro 9400
M: AVE____ M-2: AVE____ MK: AVE____ MK-2: AVE____