Epson STYLUS PRO 9400 - Page 271

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Disassembly & Assembly Disassembly Procedure 271
4.2.7.2 VALVE ASSY., HEAD; C
1. Remove the Damper Unit. See Section 4.2.7.1 on page 267.
2. Loosen the eight screws that secure the TUBE, SUPPLY, INK.
 CONNECTING SCREW, M7: 8 pcs.
3. Pull out the eight TUBE, SUPPLY, INK from the VALVE ASSY., HEAD; C and
release them from the retaining tabs.
Figure 4-111. Removing the TUBE, SUPPLY, INK
C A U T I O N
Beware of the following items when performing the next step.
 As remaining ink may leak or spatter, have a waste cloth
beforehand to wipe out it.
 Exercise care to avoid letting the dust or any foreign materials
get inside the TUBE, SUPPLY, INK.
 Be careful not to fold the TUBU, SUPPLY, INK or damage it
by hitting it against frame edges.
Retaining tabs
CONNECTING
SCREW, M7
VALVE ASSY., HEAD; C
TUBE, SUPPLY, INK