EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Disassembly & Assembly Disassembly Procedure 273
4. Remove the two screws that secure the HOLDER, DAMPER and remove the
HOLDER DAMPER turning it.
Two C.B.P. M3 x 8 screws
Figure 4-115. Removing the HOLDER, DAMPER
Engage the two coupling tabs of the HOLDER, DAMPER with the
coupling pins of the COVER, DUMPER.
Figure 4-114. Reinstalling the HOLDER, DAMPER
Coupling tabs
Coupling pins
HOLDER, DAMPER
C.B.P. 3x8
To Next Page
Loading...
