Epson STYLUS PRO 9400 - Page 332

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Basic Adjustment 332
4. Select the [Print Check Pattern] and click the [Run] button to print dot-
missing detection check patterns.
The one pattern includes dot-missing and the other one does not. The Ink
Mark Sensor scans them and the result is printed below the patterns.
5. Click the [Finish] button.
Figure 5-50. Dot-missing Detection Check Pattern (with dot-missing)
Figure 5-51. Dot-missing Detection Check Pattern (No dot-missing)
[PG=1.2]
[Count] MK:5 C :5 M :5 Y :5 LLk:5 Lm:5 LC:5 Lk:5
[Position] MK : ( 1, 3) , ( 9, 3) , ( 5, 13) , ( 1, 22) , ( 9, 22) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] C : ( 1, 3) , ( 9, 3) , ( 5, 13) , ( 1, 22) , ( 9, 22) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] M : ( 1, 3) , ( 9, 3) , ( 5, 13) , ( 1, 22) , ( 9, 22) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] Y : ( 1, 3) , ( 9, 3) , ( 5, 13) , ( 1, 22) , ( 9, 22) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] LLk : ( 1, 3) , ( 9, 3) , ( 5, 13) , ( 1, 22) , ( 9, 22) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] Lm : ( 1, 3) , ( 9, 3) , ( 5, 13) , ( 1, 22) , ( 9, 22) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] Lc : ( 1, 3) , ( 9, 3) , ( 5, 13) , ( 1, 22) , ( 9, 22) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] Lk : ( 1, 3) , ( 9, 3) , ( 5, 13) , ( 1, 22) , ( 9, 22) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
OK! Go to next work
[PG=1.2]
[Count] MK:5 C :0 M :0 Y :0 LLk:0 Lm:0 LC:0 Lk:0
[Position] MK : ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] C : ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] M : ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] Y : ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] LLk : ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] Lm : ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] Lc : ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
[Position] Lk : ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0),
( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0) , ( 0, 0)
OK! Go to next work