Epson STYLUS PRO 9400 - Page 43

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 43
Low
Remaining capacity of
the left Maintenance
Tank is insufficient
(Stylus Pro 9400/9800)
MAINT TANK NEAR FULL
REPLACE THE
LEFT SIDE
MAINTENANCE
TANK
ONONFlashing---XXXXXXX{
Remaining capacity of
the right Maintenance
Tank is insufficient
(Stylus Pro 9400/9800)
MAINT TANK NEAR FULL
REPLACE THE
RIGHT SIDE
MAINTENANCE
TANK
ONONFlashing---XXXXXXX{
Remaining capacity of
the Maintenance Tank is
insufficient
(Stylus Pro 7400/7800)
MAINT TANK NEAR FULL
REPLACE THE
MAINTENANCE
TANK
ONONFlashing---XXXXXXX{
Releasing left ink lever
*
10
INK LEVER
LOWER THE
LEFT INK
LEVER
ON ON ON --- --- X X X X X X {
Releasing right ink lever
*
10
INK LEVER
LOWER THE
RIGHT INK
LEVER
ON ON ON --- --- X X X X X X {
Printer cover open COVER OPEN
CLOSE COVER
ON ON --- --- --- X X X X X X {
Releasing paper set lever LEVER RELEASED
LOAD PAPER
ON ON --- ON --- X X { XXX{
Releasing paper set lever
in operation
LEVER RELEASED
LOWER THE
PAPER SET
LEVER
ONON---ON---XXXXXX{
High
Replacing ink cartridge INK CARTRIDGE
INSTALL INK CARTRIDGE
ON ON ON OFF --- X X X X X X {
Continued to next page
Table 1-28. Panel Display (continued)
Priority
Printer Status Messages on the LCD
LED Status Panel Button Function
Power Pause Ink Paper
Paper
Select
Enter
Paper
ejection
(3 sec.)
Paper feed Menu
Cleaning
(3 sec.)
Pause
Reset
(3 sec.)