EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 76
Note "*1": Available space in the Maintenance Tank is indicated as shown below.
"*2": Remaining lives of the cutter, CR motor, PF motor, Head unit, Cleaning unit and
Pressure motor are indicated as shown below.
"*3": Remaining amount of ink is indicated as shown below.
"*4": The ink cartridge information is displayed based on the information stored in the
CSIC of the ink cartridge.
1.4.4.20 Printing Job Information
A job history report (up to 10 jobs) stored on the printer can be printed using the “Job
Information” in the TEST PRINT menu.
The “job” includes the following operations;
A print job sent by a host computer
Printing an adjustment pattern
(includes Gap Adjustment, Nozzle Check, Cutter Adjustment, and Paper
Thickness patterns)
Printing a Status Sheet or Job Information
The following two items are required to print the Job Information. For more
information, see “1.4.3 Job Information (p.48)”.
Print paper size: A4
Font: Built-in font (Print all in alphanumeric characters)
NOTE • 2-byte characters in user name and document name is “?”.
• “-” is printed if the corresponding value does not exits.
• “?” is printed if the corresponding value is unknown.
100 to 81% E∗∗∗∗∗F
80 to 61% E∗∗∗∗ F
60 to 41% E∗∗∗ F
40 to 21% E∗∗ F
20 to 10% E∗ F
Less than 10% nn%
0% (Maintenance tank full) 0%
100 to 81% E∗∗∗∗∗F
80 to 61% E∗∗∗∗ F
60 to 41% E∗∗∗ F
40 to 21% E∗∗ F
20 to 1% E∗ F
Less than 1% FF
100 to 81% E∗∗∗∗∗F
80 to 61% E∗∗∗∗ F
60 to 41% E∗∗∗ F
40 to 21% E∗∗ F
20% ~ just before near end E∗ F
After near end ~ just before ink end nn%
0% (ink end) 0%
To Next Page
Loading...
