Epson Stylus TX209 User Manual

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
DISASSEMBLY/ASSEMBLY Removing the Circuit Boards 106
Confidential
When installing the Power Supply Unit, make sure to check the
following points.
 Insert the tabs (x2) of the Power Supply Unit into the holes on
the Base Frame.
Figure 4-28. Installing the Power Supply Unit
 Tighten the screws in the order given in Figure 4-27.
 Secure the Power Unit Cable with the hook of the Base Frame
as shown in the figure below.
 Put the ferrite core of the Power Supply Unit cable into the
cutout of the Base Frame.
Figure 4-29. Routing the Power Unit Cable
Power Supply Unit
Ribs
Base Frame
bottom
Hook
Power Unit Cable
Ferrite Core
Base Frame
A D J U S T M E N T
R E Q U I R E D
Whenever the Power Supply Unit is removed/replaced, the
required adjustments must be carried out.
• Chapter 5 “ ADJUSTMENT” (p.141)

Epson Stylus TX209 Specifications

General

Brand	Epson
Model	Stylus TX209
Category	Printer
Language	English