EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
TROUBLESHOOTING Error Indications and Fault Occurrence Causes 61
Confidential
3.3
Error Indications and Fault Occurrence Causes
This section describes how the printer indicates an error / warning status with LEDs /
LCD, or on the screen of the printer driver when a problem arises during various
operations; power-on sequence, paper feeding, ink drawing, printing, and so on.
3.3.1 Error Indication Method
You can handle most of the troubles with the messages/instructions shown on the LCD
panel or the window of “EPSON Status Monitor 3” (when connected to the PC).
For CX8300/TX400 series
Error messages are displayed on the LCD panel.
• See Figure 1-5. “ CX8300/TX400 series Control Panel ” (p.19).
For CX7300/TX200 series
Error status can be checked with the status of the LEDs or the message shown on the
windows of “EPSON Status Monitor 3”.
• See Figure 1-6. “ CX7300/TX200 series Control Panel ” (p.20).
• Message box on the window of “EPSON Status Monitor 3”
Figure 3-1. Error Indication on EPSON Status Monitor 3
Table 3-3. LEDs Status (CX7300/TX200 series)
LED Status Meaning
-- No change
ON Lights normally
Blink 1 Flashes: 1.25sec On + 1.25sec Off
Blink 2 Flashes: 0.5sec On + 0.5sec Off + 0.5sec On + 1.0sec Off
Blink 3 Flashes: 0.5sec On + 0.5sec Off
To Next Page
Loading...
Need help?
General