EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
PRODUCT DESCRIPTION Specification for Each Function 38
Confidential
1.7.4 Reprint/Restore Photos Function (CX8300/TX400
series only)
CX8300/TX400 series offers the photo copy function. This function allows the user to
copy their silver halide film-based pictures. The printer scans the pictures
automatically detecting them as silver halide film-based picture, and makes a copy of
them.
1.7.4.1 Supported Paper Type and Print Mode
Note *1 : Letter size is supported for EAI only.
*2 : The Photo Paper 5x7 size is not supported for EAI.
1.7.4.2 Reprint/Restore Photos Menu
1.7.4.3 How to Place Silver Halide Pictures
The following explains how to place silver halide film-based pictures on the document
glass of the printer.
Available picture size: 30x40 mm to 127x178mm (5”x7”)
Lay the pictures on the glass face down.
The number of pictures available at one time is as follows:
• 4x6 or smaller:up to 2 pictures
• 5x7: up to 1 picture
The following spaces are needed:
• 5 mm or more space from the right and front edges of the document glass.
• 5 mm or more space between pictures.
The pictures must not be tilted.
Figure 1-10. Laying Silver Halide Pictures
Table 1-40. Paper Type and Print Mode
Paper Type Size Quality Resolution
Dot
size
Bi-D
Micro
Weave
Borde
rless
Matte paper A4, Letter
*1
Standard
1440x720 VSD3 ON ON
OK
Photo Paper
4x6, 5x7
*2
,
A4, Letter
*1
Standard
1440x720 VSD3 ON ON
OK
Prem. Glossy
4x6, 5x7, A4,
Letter
*1
Standard
1440x720 VSD3 ON ON
OK
Ultra Glossy
4x6, 5x7, A4,
Letter
*1
Standard
1440x720 VSD3 ON ON
OK
Table 1-41. Reprint/Restore Photos Menu
Items Function
Number of copies Sets the number of copies within the range of 1 to 99.
Paper type Selects paper type from the options shown in Table 1-40.
Paper size Selects paper size from the options shown in Table 1-40.
Layout
Selects print layout from the following three options:
• Standard (normal layout with 3mm margins)
• Borderless (no margins)
Quality Fixed to “Standard“.
Expansion
Selects the margins level (margins bleed off the edges of paper)
from the Standard (100%), Mid. (50%) or Min. (0%).
Color restoration Selects from On or Off. The default is Off.
To Next Page
Loading...
Need help?
General