Item Parameter Explanation
Roll Paper Setup
Auto Cut
On
*
Choose On to automatically cut roll paper using the built-in cutter as
each page is printed or Off to disable auto paper cutting.
Off
Refresh Margin
On
*
If On is selected during borderless printing, the printer will
automatically trim the leading edge to remove any ink stains that
may have been left by the previous copy; to disable this feature,
choose Off. However, borderless printing is not guaranteed for this
printer.
Off
Page Line
On
*
If Auto Cut is Off, you can choose to print (On) or not print (Off) cut
lines on roll paper. If Auto Cut is set to On, printing cannot be
performed.
Off
Roll Paper Margin
Side
3mm
*
Sets the margins for printing on the loaded paper. When settings
have been made using RIP, priority is given to the RIP settings.
U “Printable area” on page 43
15mm
Top 5mm
15mm
*
Bottom 5mm
15mm
*
150mm
Roll Paper Remaining
On
*
Select whether or not (On/Off) to display the amount of remaining
roll paper. When you select On and enter the roll paper length, Roll
Paper Remaining is performed.
Off
Remaining Alert
1 to 15 m (5
*
)
Displayed when On is selected for Roll Paper Remaining.
Set within a range from 1 to 15 m to display a warning when the
amount of remaining roll paper drops below that limit. Paper length
is set in increments of 1 m.
SC-F6300 Series User's Guide
Using the Control Panel Menu
55
To Next Page
Loading...
