Item Parameter Explanation
Advanced Settings
Remove Skew
On
*
Select whether to enable (On) or disable (Off) paper skew reduction.
Off
Drying Time Per Page
Off
*
Specify how long the printer pauses to allow the ink to dry after
printing each page. You can select Off or values between 0.1 and 60
minutes. Depending on the ink density or paper type, the ink may
take a while to dry. If the ink blurs on the paper, set a longer time for
drying the ink.
The longer the drying time, the more time required for printing.
0.1 to 60
minutes
Paper Size Check
On
*
Select whether or not (On/Off) the printer automatically detects the
paper width when the paper is loaded. We generally recommend to
operate with this setting set to On.
Try setting Off if a paper setting error is displayed when the paper is
correctly loaded. Note, however, that the printer may print outside
the paper when Off is selected. If it prints beyond the edges of the
paper, the inside of the printer becomes dirty with ink.
Changed settings are reflected when the paper is reloaded.
Off
Paper Skew Check
On
*
If On is selected, an error will be displayed in the control panel and
printing will stop if the paper is skewed; select Off to disable this
feature. On is recommended in most circumstances as skewed
paper may cause the printer to jam.
Off
Print Nozzle Pattern
Off
*
Select how frequently the printer prints a nozzle test pattern. Print
Nozzle Pattern is not performed when Off is selected. To print a test
pattern at the top of every 1 to 10 pages, select an option between 1
and 10. When printing is complete, you can visually inspect the
pattern to determine whether there may be faint or missing colors in
the preceding or following printout.
1 to 10 pages
Periodical Cleaning
Light Off, 1 to 240
hours
Set the strength and time to perform periodic head cleaning.
Periodical Cleaning is not performed when Off is selected. If a value
between 1 and 240 hours is selected, auto head cleaning will be
performed after the specified number of hours. If printing is in
progress when the specified time has elapsed, Periodical Cleaning
will only be performed after printing is complete.
The following reset the timer:
❏ Choosing a setting time for this item.
❏ When head cleaning was performed using All Nozzles at a
strength that is the same as or higher than the setting selected
for this setting.
Note that even when Off is selected for Periodical Cleaning, the
printer will automatically clean the print head at a fixed interval after
printing to keep the nozzle from clogging.
Medium
*
Heavy
Cleaning Cycle
Off
*
Choose the frequency with which the printer performs head
cleaning: never (Off) or once every 1 to 10 pages. Cleaning Cycle is
not performed when Off is selected. Select 1 to 10 to perform head
cleaning automatically before the specified page is printed.
1 to 10 pages
SC-F6300 Series User's Guide
Using the Control Panel Menu
56
To Next Page
Loading...
