158
MEDIA SIZE ERROR L
Media size error
The paper size is inappropriate
for the print area.
(Paper feed direction)
Set the paper whose size matches the print
area or change the print area to that
suitable for the loaded paper.
MEDIA SIZE ERROR W
Media size error
The paper size is inappropriate
for the print area.
(Paper width direction)
Set the paper whose size matches the print
area or change the print area to that
suitable for the loaded paper.
PAPER JAM ERR ##
(##: D1 to D5, DC,
11 to 15, 21 to 25, 51,
61)
Paper jam error
Paper is jammed inside printer 1. Open the paper set cover.
2. Open the front cover.
If you cannot open the front cover, the
cutter blade may be locked. Turn this
product's power off and on again.
3. Remove all the paper that is in the paper
path.
4. Close the front cover.
5. Run auto loading of the paper.
6. Close the paper set cover.
PAPER O U T E R ROR
Paper out error
Paper has run out during
printing
If any paper remains in the paper path,
remove it. Then set new paper in place.
PAPER PATH ERROR
Paper path error
The paper supply method for
the paper set is different from
the method specified in the
“Media supply method
settings”.
Set paper in place that is appropriate for
the “Media supply method settings”, or
change the “Media supply method
settings” to suit the paper.
The method of the paper
supply set to the printer is
different from the specified
method of the paper supply
on "the label printing
application" or "the printer
driver provided by the label
printing application
manufacturer".
Set the method of paper supply specified
on "the label printing application" or "the
printer driver provided by the label printing
application manufacturer" to that is suitable
for the actual supply.
For instructions on how to change the
settings, refer to "Media detector and paper
path settings when using label printing
applications" on page 215
.
LCD display
Error
Description Recovery method
To Next Page
Loading...
Need help?
General
