Epson TM-C7500 Series - Page 201

201
Appendix
Die-cut label(Black mark) / Roll paper
When "Borderless Printing" is disabled
Ver tical margins: 1.5 mm {0.06"} (Typical value)
Lateral margins: 1.5 mm {0.06"} (Typical value)
The distance from the paper cut position to the black mark leading edge must be at least 1.5
mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable to print pages because
it fails to sense their black marks or skips them, etc.
Print area width
Auto-cut position
Auto-cut position
Auto-cut position
Perforated line
Paper width
Paper feeding
direction
Black mark position
Paper
Label area
Print area
25.4 mm { } or more
1.0”
28.4 mm { } or more
1.12”
22.4 mm { } or more
0.88”
1.5 mm { }
0.06”
1.5 mm { }
0.06”
0.5 to 1 mm { }
0.02 to 0.04”
1.5 mm { }
0.06”
1.5 mm { }
0.06”
Outer edge
(Removed)
2.0 mm { }
0.08”
Outer edge
(Removed)
2.0 mm { }
0.08”
1.5 mm { }
0.06”
1.5 mm { }
0.06”
1.5 mm { }
0.06”