39
Chapter 2 Setup
Attaching the Power Switch Cover
By attaching the power switch cover supplied, you can prevent accidental operations of the power switch. You
can press the power switch by inserting a sharp-pointed object in the holes on the power switch cover.
To detach the cover, use a sharp-pointed object.
A soft cover for the power switch is also included.
WARNING
If an accident occurs with the power switch cover attached, unplug the AC cable immediately.
Continued use of the printer may cause fire or shock.
Use the soft power switch cover if the printer is installed in a humid location or exposed to water. If
current leakage occurs, it could result in electric shock.
To Next Page
Loading...
