40
Chapter 2 Setup
Changing the Paper Width
You can change the paper width from 80 to 58 mm {3.15 to 2.28"} by installing the included 58-mm {2.28"}
width roll paper guide. Follow the steps below to change the paper width.
1
Open the roll paper cover.
2
Align the three tabs of the 58-mm {2.28"} width roll paper guide with the rectangular
holes in the printer, and push the guide downward.
3
Using the memory switch, change the paper width setting.
For more information, see "Software Settings" on page 41.
Because some parts of the print head and the autocutter contact the platen and they may become
worn out, once you change the paper width from 80 to 58 mm {3.15 to 2.28"} and use the printer,
you cannot change it back to 80 mm {3.15"}.
Rectangular holes
Roll paper guide
To Next Page
Loading...
