74
Chapter 6 Replacement of the TM-T20II
Replacement of the TM-T20II
The TM-T20III is designed so that it can smoothly replace the TM-T20II. This chapter describes precautions
for the replacement.
Compatibility
Printing
The printing and character specifications are the same as those of the TM-T20II. Without special
configurations, the TM-T20III prints the same results as the TM-T20II prints.
Print Speed
The TM-T20III prints faster than the TM-T20II.
Logo Registration
The TM-T20III can register logos in the NV memory (NVRAM) with the Setup Utilities.
Driver Compatibility
You can operate the TM-T20III with a driver for the TM-T20II.
TM-T20III TM-T20II
Maximum print speed Up to 250 mm/s {9.84"/s} Up to 200 mm/s {7.87"/s}
Print speed setting Level 1 to 13 Level 1 to 13
Depending on print conditions such as print duty, print head temperature, and data transmission
speed, print speed is automatically adjusted.
To Next Page
Loading...
