Epson TM-T20III - Character Specifications

78
Appendix
Character Specifications
*: Space between characters is not included.
Characters can be scaled up to 64 times as large as the standard size.
80 mm {3.15"} width paper 58 mm {2.28"} width paper
Number of characters Alphanumeric characters: 95
Extended graphics: 128 × 43 pages (including user-defined page)
International characters: 18 sets
Character
structure
(W x H dots)
Standard mode
(default setting)
Font A 12 × 24 dots (Right-side dot space: 2)
Font B 9 × 17 (Right-side dot space: 2)
42 column mode Font A 13 × 24 dots (Right-side dot space: 3)
Font B 9 × 17 dots (Right-side dot space: 2)
Character size
*
Standard
Double-height
Double-width
Double-width
double-height
Standard mode
(default setting)
Font A
1.25 × 3.00 mm {0.05 × 0.12"}
1.25 × 6.00 mm {0.05 × 0.24"}
2.50 × 3.00 mm {0.10 × 0.12"}
2.50 × 6.00 mm {0.10 × 0.24"}
Font B
0.88 × 2.13 mm {0.03 × 0.08"}
0.88 × 4.26 mm {0.03 × 0.16"}
1.76 × 2.13 mm {0.06 × 0.08"}
1.76 × 4.26 mm {0.06 × 0.16"}
42 column mode
Font A
1.25 × 3.00 mm {0.05 × 0.12"}
1.25 × 6.00 mm {0.05 × 0.24"}
2.50 × 3.00 mm {0.10 × 0.12"}
2.50 × 6.00 mm {0.10 × 0.24"}
0.88 × 2.13 mm {0.03 × 0.08"}
0.88 × 4.26 mm {0.03 × 0.16"}
1.76 × 2.13 mm {0.06 × 0.08"}
1.76 × 4.26 mm {0.06 × 0.16"}
Font B
0.88 × 2.13 mm {0.03 × 0.08"}
0.88 × 4.26 mm {0.03 × 0.16"}
1.76 × 2.13 mm {0.06 × 0.08"}
1.76 × 4.26 mm {0.06 × 0.16"}
1.25 × 3.00 mm {0.05 × 0.12"}
1.25 × 6.00 mm {0.05 × 0.24"}
2.50 × 3.00 mm {0.10 × 0.12"}
2.50 × 6.00 mm {0.10 × 0.24"}
Refer to the following URL regarding the character code table.
www.epson-biz.com/pos/reference/charcode/