Epson TM-T20III - Serial Interface Communication Condition; Interface selection

47
Chapter 3 Advanced Usage
Serial Interface Communication Condition
Baud rate
• 2400 bps
• 4800 bps
• 9600 bps
• 19200 bps
• 38400 bps (default setting)
• 57600 bps
• 115200 bps
Parity
• No parity (default setting)
• Odd parity
• Even parity
Handshaking
• DTR/DSR (default setting)
• XON/XOFF
Bit length
• 7 bits
• 8 bits (default setting)
Interface selection
• UIB (The interface used for data communication is limited to the serial interface.)
• Built-in USB
• Ethernet
*1
• UIB / Built-in USB (The interface used for data communication is limited to the interface connected to the
printer.)
*2
• Auto Selection
*1: Default setting for Ethernet interface model.
*2: Default setting for Serial/USB interface model.
• The default settings and selectable settings differ according to the model.
• If the model has the USB Type B port blocked by a metal plate, to use the USB interface, it is
necessary to remove the metal plate, connect the USB cable, and select [Built-in USB] or [Auto
Selection] for this setting.