49
Chapter 3 Advanced Usage
Extended settings for auto top logo/bottom logo printing
Top logo print while paper feeding to the cutting position
• Disabled (default setting)
• Enabled
Top logo print when printer is powered on
• Disabled (default setting)
• Enabled
Top logo print when roll paper cover is closed
• Disabled
• Enabled (default setting)
Top logo print while clearing the buffer to recover from a recoverable error
• Disabled
• Enabled (default setting)
Top logo print after paper feeding with the Feed button has finished
• Disabled (default setting)
• Enabled
TM-T20III Utility does not support the following settings.
• Top logo print while paper feeding to the cutting position
• Top logo print while clearing the buffer to recover from a recoverable error
• Top logo print after paper feeding with the Feed button has finished
To Next Page
