Epson TM-T88V-DT

Chapter 2 Setup
109
2
Printer Settings
You can register logos in the NV (non volatile) memory area in the printer unit and print them.
•Use TM-T88V Utility to register logos.
Register Procedures
Follow the steps below to register logos.
1
Select [Start] - [All Programs] - [EPSON] - [TM-T88V Software] - 
[TM-T88V Utility].
2
Select [Storing Logos], and then click [Add].
You can also directly print raster format image data as logos without registering them on the
product.
It is recommended to write all logos together in the printer when you register more than one
logo.