92
Registering Web content
Use EPSON TMNet WebConfig to register Web contents on this product, following the
procedures below.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
2
Select [Settings] - [Web service settings], then [Update settings].
The "Web content update settings" screen is displayed.
3
Select [Browse...], and specify the file (zip file format) you want to
register, then click [Upload].
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://”TM-DT’s IP address”/webconfig
The default IP address for this product is "192.168.192.168".
To Next Page
Loading...
