Epson TM-T88V-DT

Chapter 2 Setup
87
2
Service Startup Settings
It is necessary to perform service setup settings for the TM-T88V-DT depending on the system
operation method.
Use EPSON TMNet WebConfig to perform the service setup settings, following the procedures
below.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
2
Select [Settings] - [Web service settings], then [Startup settings].
The "Startup settings" screen is displayed.
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://"TM-DT’s IP address"/webconfig
The default "TM-DT's IP address" for this product is "192.168.192.168".