78
Network settings
Perform network settings, such as the IP address. You can perform settings in the following
ways.
•Setting in a local environment:Setting with Windows
Setting with EPSON TMNet WebConfig
•Setting on a PC for setting:Setting with EPSON TMNet WebConfig
Windows Embedded POSReady 7
Click [Start], then [Control Panel]. Run "Network and Sharing Center".
Select the type of connection you want to perform settings for, and open the connection
properties.
Windows Embedded POSReady 2009
Click [Start], then [Control Panel]. Run "Network Connections".
Right-click on the connection you want to perform settings for, and select connection properties.
If you perform settings in a local environment, connect a display, a keyboard, and a mouse
with this product. If you use a PC for setting, you do not have to connect a display, a
keyboard, and a mouse with this product. Instead, set up a direct network connection with
this product.
To Next Page
Loading...
