Chapter 2 Setup
79
2
EPSON TMNet WebConfig
Run [Disabling ePOS-Device] from the shortcut on the desktop.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
2
Select [Settings] - [System settings] - [TCP/IP] under “Wired LAN”.
The "TCP/IP setting (Wired)" screen is displayed.
3
Set the IP address and other network settings, then click [Apply].
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://"TM-DT’s IP address"/webconfig
The default "TM-DT's IP address" for this product is "192.168.192.168".
To Next Page
Loading...
