136
Settings - Web service settings - Customer Display
Performs the settings for the customer display controlled by this product.
Item Description
Do not use Do not use a customer display.
Use Use a customer display.
Communication
settings
Communication
speed (bps)
Set the communication speed.
Data bit Set the data bit.
Parity Set the parity.
Brightness setting Set the brightness of the customer display in percentages.
You can set 20%, 40%, 60%, or 100%. The maximum bright-
ness is 100%.
Display test Check if the customer display operates properly.
When [Display test] is clicked, characters appear on the
customer display.
Apply Registers the settings to this product.
To Next Page
Loading...
