Epson TM-T88V-DT

Chapter 2 Setup
95
2
Connecting POS Peripherals
•Connect POS peripherals with USB interface to the USB connectors.
•Connect POS peripherals with serial interface to the COM connector or use USB-serial conver-
sion cables to convert them and connect them to the USB connectors, and install the drivers for
each model. For det ails such as the order in which to conn
ect them, refer to each device's
user's manual.
•You can perform the connection test from EPSON TMNet WebConfig. For details, refer to"Set-
ting the Devices" on page 98.
Dedicated drivers are necessary, depending on the devices.
Acquire and install the drivers as necessary.