98
Setting the Devices
Registering a Printer
Use EPSON TMNet WebConfig to register a network printer on this product, following the
procedures below. This product's printer is already registered, so settings are not necessary.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
2
Select [Settings] - [Web service settings], then [Printer].
The "Printer" screen is displayed.
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://"TM-DT’s IP address"/webconfig
The default "TM-DT's IP address" for this product is "192.168.192.168".
To Next Page
Loading...
